Diameter 14mm 16mm 18mm 20mm 22mm HRB400 HRB500 Steel Rebar Price Deformed Bar Iron Rod Mild Steel Rebar Price

• Customization: Available
• After-sales Service: Video Technical Support
• Warranty: 50 Years
• Model NO.: HRB400 / HRB500 /B500B /gr40 / gr60
• Length: 12m
• Standard: GB
• Sample: Available
• Terms: EXW Fob CFR CIF
• Delivery: 7-15 Days
• Payment: 30%Tt
• Stocks: Available
• Transport Package: Standard
• Specification: 6mm/8mm/10mm/12mm/14mm/16mm/18mm/20mm/25mm/30mm
• Trademark: BAOTAI
• Origin: China
• HS Code: 7214100000
• Production Capacity: 50000t/Week

Product Description

Product Description

Rebar (short for reinforcing bar), known when massed as reinforcing steel or steel reinforcement,is a steel bar used as a tension device in reinforced concrete and reinforced masonry structures to strengthen and aid the concrete under tension. Concrete is strong under compression, but has low tensile strength. Rebar significantly increases the tensile strength of the structure. Rebar's surface features a continuous series of ribs, lugs or indentations to promote a better bond with the concrete and reduce the risk of slippage.

The most common type of rebar is carbon steel, typically consisting of hot-rolled round bars with deformation patterns embossed into its surface. Steel and concrete have similar coefficients of thermal expansion, so a concrete structural member reinforced with steel will experience minimal differential stress as the temperature changes.

Other readily available types of rebar are manufactured of stainless steel, and composite bars made of glass fiber, carbon fiber, or basalt fiber. The carbon steel reinforcing bars may also be coated in zinc or an epoxy resin designed to resist the effects of corrosion, especially when used in saltwater environments. Bamboo has been shown to be a viable alternative to reinforcing steel in concrete construction.These alternative types tend to be more expensive or may have lesser mechanical properties and are thus more often used in specialty construction where their physical characteristics fulfill a specific performance requirement that carbon steel does not provide

Product Name	Rebar/Deformed Steel Rebar
Application	Building Construction
Shape	Straight, coil
Technical	Low temperature hot-rolling reinforcing
Length	6/12m, Customized
Diameter	6/8/10/12/14/16/20/22/25/30/32mm
Steel grade	HPB300,HRB400, HRB500, HRB400E, HRB500E,Gr40;Gr60
Standard	GB, ASTM, AISI, EN, JIS, BS
Surface	Black or Customized
Capacity	8000 tons/month
Package	In Bundles

 

Detailed Photos

Wire Rod

 
The steel of coil steel is generally divided into plates, profiles, and wires. Coil steel is considered wire. As the name suggests, coil steel is a rebar that is coiled together like wire. It is bundled in the same way as ordinary wire, but it needs to be straightened when used. Most of the steel on the market is 6.5-8.0-10-12-14, which are all used for construction.

The billets used in continuous small rolling mills are generally small square billets cast in continuous casting. Their side lengths are generally 130~160mm, their lengths are generally around 6~12 meters, and their single billet weights are 1.5~3 tons. The rolling lines are mostly arranged in a horizontal-vertical alternating pattern to achieve torsion-free rolling throughout the entire line. According to different billet specifications and finished product sizes, there are small rolling mills with 18, 20, 22, and 24 racks, with 18 racks being the mainstream. Bar rolling mostly uses new processes such as step-beam heating furnaces, high-pressure water descaling, low-temperature rolling, and headless rolling. Rough rolling and intermediate rolling are developed to adapt to large billets and improve rolling accuracy. Finishing mills are mainly used to improve accuracy and speed (maximum 18m/s). Product specifications are generally ф10-40mm, and there are also ф6-32mm or ф12-50mm.
 

Packaging & Shipping

Constructions

 

Related Products

1. Hot rolled coils are made of continuous casting slabs or initial rolled slabs. They are heated in a step-beam heating furnace, descaled with high-pressure water, and then enter the rough rolling mill. The rough rolled material is cut and then enters the finishing mill for computer-controlled rolling. After the final rolling, it is cooled by laminar flow (cooling rate is controlled by computer) and coiled by a coiler to become a straight roll.

2. Cold Rolled Coils Different from hot-rolled coil, cold-rolled coil refers to the steel strip that is directly rolled to a certain thickness by rollers at room temperature and then rolled into a whole roll by a coiler. Compared with hot-rolled coil, cold-rolled coil has a brighter surface and higher finish, but it will produce more internal stress and is often annealed after cold rolling.

3. Galvanized coils are made by dipping thin steel sheets into a molten zinc bath to make a layer of zinc adhere to the surface of the thin steel sheet. It is mainly produced by continuous galvanizing process, that is, the rolled steel sheets are continuously dipped into a molten zinc bath to make galvanized steel sheets; alloyed galvanized steel sheets. This type of steel sheet is also made by hot dip method, but after leaving the bath, it is immediately heated to about 500ºC to form an alloy film of zinc and iron. This type of galvanized coil has good coating adhesion and weldability.

4.Color coated steel coil is a product made of hot-dip galvanized steel sheet, hot-dip aluminum-zinc steel sheet, electro-galvanized steel sheet, etc. After surface pretreatment (chemical degreasing and chemical conversion treatment), one or several layers of organic coating are applied on the surface, and then cured by baking. It is named after the colored steel coils coated with various colors of organic coatings, and is referred to as color coated steel coils.
 

Client Visitings

Company Profile

SHANDONG BAOTAI METAL MATERIALS GROUP CO.,LTD was Located in Jinan, the capital of Shandong Province. Mainly engaged in stainless steel, carbon
steel, galvanized steel, PPGI, PPGL, copper, aluminum. Our team has focused on the steel industry for 15 years. The company has
established long-term close cooperative relations with well-known domestic steel companies. At the same time, the company's annual
spot reserve exceeds 1000,000 tons, so we can guarantee a short delivery time. Baotai Steel provides services for large
enterprises such as domestic government construction projects, Chinese listed companies, and state-owned enterprises. High-quality
products, low prices, and high-quality services are highly praised by customers. Customers from various countries have signed
agency agreements with Baotai Steel and become Baotai Steel's agents. Baotai Steel's service team is online 24 hours a day to
provide you with professional and high-quality services. At the same time, Baotai Steel also adheres to the concept of win-win,
customer-centric, and looks forward to becoming your trustworthy and high-quality enterprise.

Q1: What is your MOQ?
A: Usually our MOQ is one container, but it is different for some items, please contact us for details.

Q2:What is your terms of payment?
A:We usually accept T/T in advance, L/C for large sum.If you prefer other payments terms, please discuss.

Q3:What is your delivery time?
A:For products in stock, we can ship it within 7 days after receiving the deposit. For custom order, production time is 15-30 workdays after received the deposit.

Q4:How could you guarantee your products?
A:Mill Test Certification is supplied with shipment, We also accept and support the third-party inspection.We also could issue the warranty to customer to guarantee the quality.

Q5: Will all costs be clear?
A:Our quotation is easy to understand and will not incur any additional costs.